| HOSE & FITTINGS | ADAPTERS | LUBRICATION | REELS | EQUIPMENT | RESOURCES | ORDER FORM | CONTACT US | |
HOSE LINE 6060 San Fernando Road Glendale, California 91202 |
Phone: (818) 547-3010 Fax: (818) 547-3339 Sales@HoseLine.Net |
Gates Push On Hose
|
||
PRODUCT INFORMATION Gates® LOL Plus. "Petroleum-base hydraulic oils, water, glycol antifreeze solutions, hot lubricating oils, and air. . . . not recommended for pressure surge applications or critical applications, such as permanent piping in residential or commercial buildings. Not recommended for gasoline or diesel fuels. . . . Temperature Range: -40 °F to +212 °F (-40 °C +100°C). For air: 160 °F (+71 °C) only . . . Tube: Black, oil resistant synthetic rubber highly resistant to oil and heat . . . Reinforcement: One fiber braid. . . . Cover: Oil- and abrasion-resistant synthetic rubber. Available in black-Neoprene (LOLA), . . . " Gates Hydraulic Catalog, 2002 ed. pp. 27. Use push on fittings are available. Minimum orders apply: 300 feet (ft) reel for 3/16 inch. 50 ft & 300 ft length for 1/4 inch to 1/2 inch sizes. 50 ft & 250 ft length for 5/8 inch to 3/4 inch hose sizes. See Gates fuel line hoses, if you are looking for gasoline and diesel applications. Updated: March 2004. |
ITEM | DESCRIPTION | AMT |
GAT LOLA-03 | LOL PLUS. BLACK. 3/16 IN ID. | |
GAT LOLA-04 | LOL PLUS. BLACK. 1/4 IN ID | |
GAT LOLA-05 | LOL PLUS. BLACK. 5/16 IN ID | |
GAT LOLA-06 | LOL PLUS. BLACK. 3/8 IN ID | |
GAT LOLA-08 | LOL PLUS. BLACK. 1/2 IN ID | |
GAT LOLA-10 | LOL PLUS. BLACK. 5/8 IN ID | |
GAT LOLA-12 | LOL PLUS. BLACK. 3/4 IN ID |
Aeroquip® High Performance Push On Hose
|
||
PRODUCT INFORMATION Aeroquip® FC332 Socketless hose. Low pressure, socketless design. Tube construction and cover are made with the proprietary AQP® elastomer material. For use with gasoline, fuel, oil, water, and air. Push On fittings are available. |
ITEM | DESCRIPTION | AMT |
AE FC332-04 | PUSH ON HOSE 1/4 IN ID | |
AE FC332-06 | PUSH ON HOSE 3/8 IN ID | |
AE FC332-08 | PUSH ON HOSE 1/2 IN ID | |
AE FC332-10 | PUSH ON HOSE 5/8 IN ID | |
AE FC332-12 | PUSH ON HOSE 3/4 IN ID |
NPTF Male
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ACC 272 Series. Push lock stem to rigid male pipe (NPTF thread). This fitting style will only seal with the 274 series. |
|
NPTF 90° Male
|
|||||||||||||||||||||||||
PRODUCT INFORMATION ACC 273 Series. Push lock stem to 90 degree elbow male pipe (NPTF thread). This fitting style will only seal with the 274 series. Updated: 2000. |
|
NPTF Female Internal
|
||||||||||||||||||||||||||||||||||||||||
PRODUCT INFORMATION ACC 274 Series. Push lock stem to rigid female internal pipe (NPTF thread). This fitting style will only seal with the 271, 272, and 273 series. Updated: 2000. |
|
NPTF Female Swivel
|
||||||||||||||||||||||||||||
PRODUCT INFORMATION ACC 278 Series. Push lock stem to swivel female pipe (NPSM thread. Ball seat). This fitting will only seal with NPSM styles. Updated: 2000. |
|
LOC-RFPX (GASKET SEAL)
|
||
PRODUCT INFORMATION ACC 280 Series. Push lock stem to swivel female pipe (NPSM thread. Gasket seal seat). This fitting will only seal with NPSM styles. Updated: 2000. |
ITEM | DESCRIPTION | AMT |
NON-STOCKING. CALL US FOR SIZES AND AMTS |
LOC-RMS
|
||
PRODUCT INFORMATION ACC 282 Series. Push lock stem to male SAE 45° flared seat. This fitting style will only seal with the 284 series. Updated: 2000. |
ITEM | DESCRIPTION | AMT |
ACC 282-0407 | 4LOC-4RMS | |
ACC 282-0408 | 4LOC-5RMS | |
ACC 282-0610 | 6LOC-6RMS | |
ACC 282-0812 | 8LOC-8RMS | |
ACC 282-1217 | 12LOC-12RMS |
LOC-RFSX
|
||
PRODUCT INFORMATION ACC 284 Series. Push lock stem to female swivel SAE 45° flared seat. This fitting style will only seal with the 282 series. Updated: 2000. |
ITEM | DESCRIPTION | AMT |
ACC 284-0410 | 4LOC-6RFSX | |
ACC 284-0510 | 5LOC-6RFSX | |
ACC 284-0610 | 6LOC-6RFSX | |
ACC 284-1217 | 12LOC-12RFSX |
LOC-RMJ
|
||
PRODUCT INFORMATION ACC 286 Series. Push lock stem to rigid male SAE 37° flared seat. Also known as male J.I.C. fitting. This fitting style will only seal with the 288 series and some of the 287 series. Updated: 2000. |
ITEM | DESCRIPTION | AMT |
ACC 286-0407 | 4LOC-4RMJ | |
ACC 286-0409 | 4LOC-6RMJ | |
ACC 286-0609 | 6LOC-6RMJ | |
ACC 286-0812 | 8LOC-8RMJ | |
ACC 286-1217 | 12LOC-12RMJ |
LOC-RFJSX
|
||
PRODUCT INFORMATION ACC 287 Series. Push lock stem to swivel female SAE 37°/SAE 45° flared seat. Also known as female J.I.C. fitting; however, this particular fitting has a double seat. This fitting allows SAE 37° and SAE 45° seats to seal with this style. This fitting style will seal with some of the 286 series and some of the 282 series. This will not seal with #6 and #12 sizes of the 282 series. |
ITEM | DESCRIPTION | AMT |
ACC 287-0407 | 4LOC-4RFJSX | |
ACC 287-0408 | 4LOC-5RFJSX | |
ACC 287-0612 | 6LOC-8RFJSX | |
ACC 287-0812 | 8LOC-8RFJSX | |
ACC 287-0814 | 8LOC-10RFJSX | |
ACC 287-1014 | 10LOC-10RFJSX |
LOC-RFJX
|
||
PRODUCT INFORMATION ACC 288 Series. Push lock stem to swivel female SAE 37° flared seat. Also known as female J.I.C. fitting. This will seal with the 286 series only. Updated: 2000. |
ITEM | DESCRIPTION | AMT |
ACC 288-0409 | 4LOC-6RFJX | |
ACC 288-0609 | 6LOC-6RFJX | |
ACC 288-1217 | 12LOC-12RFJX |
LOC-RMIX
|
||
PRODUCT INFORMATION ACC 290 Series. Push lock stem to swivel male inverted flare seat. This fitting style is equal to SAE 45° fittings, but 42° inverted flare at the end. This will seal with the 292 series only; it will not mate with 284 series or any of the regular flared fittings. Updated: 2000. |
ITEM | DESCRIPTION | AMT |
ACC 290-0406 | 4LOC-3RMIX | |
ACC 290-0407 | 4LOC-4RMIX | |
ACC 290-0408 | 4LOC-5RMIX | |
ACC 290-0508 | 5LOC-5RMIX | |
ACC 290-0510 | 5LOC-6RMIX | |
ACC 290-0608 | 6LOC-5RMIX | |
ACC 290-0610 | 6LOC-6RMIX | |
ACC 290-0812 | 8LOC-8RMIX | |
ACC 290-1014 | 10LOC-10RMIX |
LOC-RFI
|
||
PRODUCT INFORMATION ACC 292 Series. Push lock stem to rigid female inverted flare seat. This fitting style is equal to SAE 45° fittings, but 42° inverted flare at the end. This will seal with the 290 series only; it will not mate with 282 series, 286 series, or any of the regular flared fittings. Updated: 2000. |
ITEM | DESCRIPTION | AMT |
ACC 292-0406 | 4LOC-3RFI | |
ACC 292-0407 | 4LOC-4RFI | |
ACC 292-0408 | 4LOC-5RFI | |
ACC 292-0608 | 6LOC-5RFI | |
ACC 292-0610 | 6LOC-6RFI | |
ACC 292-0812 | 8LOC-8RFI |
LOC-RNASP
|
||
PRODUCT INFORMATION ACC 294 Series. Push lock stem to stand pipe. |
ITEM | DESCRIPTION | AMT |
ACC 294-0403 | 4LOC-3RNASP | |
ACC 294-0404 | 4LOC-4RNASP | |
ACC 294-0405 | 4LOC-5RNASP | |
ACC 294-0606 | 6LOC-6RNASP | |
ACC 294-0808 | 8LOC-8RNASP | |
ACC 294-1010 | 10LOC-10RNASP |
LOC-RHM
|
||
PRODUCT INFORMATION ACC 296 Series. Push lock stem to Push lock stem. Hose mender, also known as, hose splicer. Updated: 2000. |
ITEM | DESCRIPTION | AMT |
ACC 296-0404 | 4LOC-4RHM | |
ACC 296-0505 | 5LOC-5RHM | |
ACC 296-0606 | 6LOC-6RHM | |
ACC 296-0808 | 8LOC-8RHM | |
ACC 296-1010 | 10LOC-10RHM | |
ACC 296-1212 | 12LOC-12RHM |
LOC-RFJX45M
|
||
PRODUCT INFORMATION AE FC5847- Series. Push lock stem to swivel female SAE 37° flared seat, 45° elbow medium drop. This will only seal with J.I.C. (Joint Industrial Council; 37° flared seat) case types. |
ITEM | DESCRIPTION | AMT |
AE FC5847-0606S | 6LOC-6RFJX45M 3/8 IN TO 9/16-18 THREAD FEMALE JIC 45 DEG ELBOW MEDIUM DROP |
LOC-RFJX90S & LOC-RFJX90L
|
||
PRODUCT INFORMATION AE 190516-06S & AE 190465-06S. Push lock stem to female JIC swivel swivel, 90° elbow, short & long drop. These JIC 37° seats will not mate with the SAE 45° flare seats. |
ITEM | DESCRIPTION | AMT |
AE 190516-06S | 6-6RFJX90S 3/8 IN TO 9/16-18 THREAD FEMALE JIC 90 DEG ELBOW SHORT DROP |
|
AE 190465-06S | 6LOC-6RFJX90L 3/8 IN TO 9/16-18 THREAD FEMALE JIC 90 DEG ELBOW LONG DROP |
LOC-RFSX45M
|
||
PRODUCT INFORMATION AE FC5848- Series. Push lock stem to swivel female SAE 45° flared seat, 45° elbow medium drop. This will not seal with J.I.C. (Joint Industrial Council) case types. Updated: 2000. |
ITEM | DESCRIPTION | AMT |
AE FC5848-0606S | 6LOC-6RFSX45M 3/8 IN TO 5/8-18 THREAD FSX45M |
LOC-RFSX90S
|
||
PRODUCT INFORMATION AE 190328-. Push lock to female SAE 45°, 90° elbow, short drop. |
ITEM | DESCRIPTION | AMT |
AE 190328-06S | 6LOC-6RFSX90S 3/8 IN TO 5/8-18 THREAD FEMALE SAE 45° 90 DEG ELBOW SHORT DROP |
LOC-RFJSX45M
|
||
PRODUCT INFORMATION AE FC5849- Series. Push lock stem to female JIC/SAE (SAE 37° & 45° double seat) swivel, 45° elbow medium drop. |
ITEM | DESCRIPTION | AMT |
AE FC5849-0404S | 4LOC-4RFJSX45M 1/4 IN TO 7/16-20 THREAD FJSX45M |
|
AE FC5849-0808S | 8LOC-8RFJSX45M 1/2 IN TO 3/4-16 THREAD FJSX45M |
LOC-RFJSX90S & LOC-RFJSX90L
|
||
PRODUCT INFORMATION AE 191321- & AE FC5852-. Push lock to female JIC 90° elbow, short drop & long drop. |
ITEM | DESCRIPTION | AMT |
AE 191321-04S | 4LOC-4RFJSX90S 1/4 IN TO 7/16-20 THREAD FEMALE JIC 90 DEG ELBOW SHORT DROP |
|
AE 191321-0806S | 6LOC-8RFJSX90S 3/8 IN TO 3/4-16 THREAD FEMALE JIC 90 DEG ELBOW SHORT DROP |
|
AE 191321-08S | 8LOC-8RFJSX90S 1/2 IN TO 3/4-16 THREAD FEMALE JIC 90 DEG ELBOW SHORT DROP |
|
AE FC5852-0404S | 4LOC-4RFJSX90L 1/4 IN TO 7/16-20 THREAD FEMALE JIC 90 DEG ELBOW LONG DROP |